power pistol loading data - An Overview

power pistol loading data - An Overview

Blog Article

All are much slower burning than Green Dot. Upcoming, the MEC bushing chart will only get you shut. You should Examine the thrown bodyweight which has a scale.



Don't understand about 410, but, I bumped into precisely the same issue with Alliant e3. I started off shooting it in .40 S&W and in many cases sent take a look at loads to Alliant for strain testing with fantastic effects.

Accurate Powders is actually a company that certainly lives nearly its title. The complete line of smokeless powders for handguns, rifles, and shotguns is engineered and lab-analyzed To optimize precision and effectiveness.

All there powders can get you to 1350fps in 410 no difficulties (without the need of even getting near to max Doing work pressures), and since These are both equally quite near to the identical melt away variety of powders, it all will come down which one you will find the minimum costly alternatively.

In case you are reloading inside the 1200fps array isntead, then your improved off with the #296 powder as a substitute (a little bit faster burn up charge, so a slightly better burn with the slower speeds/pressures in its place). Hell, get is one particular step farther, and When you are from the 1200fps vary in 410, better off with lil gun or 410 powder, since they've a cleaner burn off at these speeds, considering the fact that they've got a higher Operating pressure at these speeds as an alternative (melt away within the #294-#295 burn up array isntead, and these types of powder burns to quick to receive you on the 1350fps assortment to begin with since a knockout post you will dancing/flirty with max Performing pressures isntead).

This really is an older thread, you might not get a reaction, and could be reviving an aged thread. Be sure to contemplate making a new thread.




So 296/297 at 1200fps leaves a great deal of unburnt powder during the bore, though the speedier/higher Functioning tension loads precise ends up with a lot less unburnt powder within the bores isntead.

So In case your not planning to ream the shot bushing and just Allow it toss 214grs of shot, then up the powder bushing to a .three hundred" ID bushing in the HS loads. This extra minimal little bit of powder will give the shell the wanted quantity to fill it thoroughly, Therefore the shot isn't going to rattle immediately after crimp.

Accurate 1680 uses the best ballistic experts as well as highest high-quality components alongside one another to assure that every gun is healthier served with Accurate Powders.

I've but to try 300MP, but from all reviews it is a fine 410 powder. I moved to W-296/H-110 a variety of yrs in the past, for a similar explanations that Bob states. Click This Link Higher velocities with decrease pressures. It covers this area properly, and with very good case lifestyle.

This really is an older thread, you might not get a reaction, and will be reviving an old thread. Remember to consider developing a new thread.

Accurate 1680 Powder is a popular selection amongst small caliber rifle and pistol shooters who demand steady performance and accuracy. This smokeless powder is built to produce high velocities and tight groups, which makes it an excellent option for competitive shooting and varmint hunting.




You don't have to have any wad tension with present day 410 wads but changing the cam would be your last move within the crimp phase. Ive arrange an 8570 grabber a 600jr in addition to a 9000 grabber and the 410 is Tremendous finicky, but when you at last get it You will be joyful! shotgunworld.com has a lot of helpful shotgun loaders

The shell are definetly underneath powered. Again I'm applying Alliant Green Dot powder as encouraged from other forums which i read. I'm open up to any recommendations or suggestions on these loads.